G1601TVL-02 1/8 NPT TANK VALVE WITH 3/4 LONG STEM

Tire valves were invented by August Schrader and his son George, and they patented the design in 1898. Tire valves are standardized around the world and all are basically this same design, which hasn
Tire valves were invented by August Schrader and his son George, and they patented the design in 1898. Tire valves are standardized around the world and all are basically this same design, which hasn't changed in over 100 years. The male thread dimension is 0.305 O.D. x 32 threads per inch.

Globe valve, DN15 G1 / 2in brass globe shut-off valve

G1601TVL-02 1/8 NPT TANK VALVE WITH 3/4 LONG STEM

G1601TVL-02 1/8 NPT TANK VALVE WITH 3/4 LONG STEM

TV-399) Tank Valve Tire Supply Network

Sherwood Chlorine 3/4-14NGT CL1 Standard Ton Container Valve PTFE

1/8 male national pipe thread Maximum pressure of 200 pounds per square inch 1 overall length

Milton S-684 1/8 NPT Tank Valve - Pack of 2

Milton S-684 1/8 NPT Tank Valve - Pack of 2 : Milton

Milton S-684 1/8 NPT Tank Valve - Pack of 2 : Milton

Tire valves were invented by August Schrader and his son George, and they patented the design in 1898. Tire valves are standardized around the world

G1601TVL-02

1/2″ NPT Pipe Thread Brass Fuel Gas Tank Roll Over Safety Vent

BrassCraft 3/8 in. FIP Inlet x 3/8 in. Compression Outlet 1/4-Turn

TUBE FITTING 1/4 OD x 1/8 NPT ELBOW

U.S. Solid 2pcs Brass Reducer Hex Bushing Brass Threaded Pipe

1/8 NPT 10 BAR (150 PSI) fuel/oil pressure sensor

Heater Hose End Fitting - Straight with 3/8 NPT and 5/8 Barb.

1/8- 27 NPT Straight Flute Taper Tap