Antiquing Fluid

Antiquing Fluid is a cold patination treatment which will colour new or bright brass, copper or bronze to give an antique look.
Antiquing Fluid is a cold patination liquid treatment which will colour new or bright brass, copper or bronze to give an antique look. It is ideal for use in antique restoration and must be used on clean unlacqueredbrass and copper free from oils and grease. The level of colouration is controlled by the dilution. The application method is by total immersion, brushing or swabbing. When the desired shade is achieved protect the metal with with Liberon beeswax paste or Briwax spray wax. Black: For all copper based alloys & mild steel.The process is primarily designed for immersion. The surface of the metal is not etched, there are no dimensional changes. Parts are usually oiled or waxed after treatment as the blacking process itself is not formulated to impart any corrosion preventive properties. The process can be glycol thickened and brush applied for touching up work.This product will also impart a dark grey finish to zinc.Brown: For Copper & Brass, on Gilding Metal and Silver.The colours range from light to dark brown, but a slight etching effect gives a flatter thereby darker effect. The process can also be used as a barrelling process as described above and can be used as a subsequent process on electroplated deposits of Copper, Brass and Silver.Bronze: For Copper & Brass, on Gilding Metal and Silver. This is very similar to the brown, however gives a more warmer tone and a bit lighter shade of ageing.Old English Brass: For Copper & Brass, on Gilding Metal and Silver. This is very similar to the bronze but with a lighter tone, more of a washed out appearance. The Brown, Bronze and Old English Brass are NOT suitable for Steel. Please note that the photo examples used below are as a guide only. You can achieve many different effects using this product depending on the method of application. Please note that 250ml, 500ml and 1L bottles will come with our own label, but the fluid inside is from Curator.

Antiquing Fluid - Trial Pack

1 # Antiquing Fluid - Trial Pack

Antiquing Liquid

Metal Colouring Tourmaline, Antiquing Fluid, Patination Fluid - 500 ml

Harts Curator Antiquing Patination Fluid Black 150ml : : DIY & Tools

It is easy to use and ideal for use in antique restoration for ageing new brass and copper fittings. Apply the Antiquing Fluid directly onto the item,

Metal Antiquing Fluid, Cold Patination Fluid for Ageing Brass, Bronze or Copper

Metal Antiquing Fluid – Tourmaline, Patination Fluid - Antiques World

Antiquing Brass

Harts Curator Verdigris Antiquing Patination Fluid Solution 150ml : : DIY & Tools

Antiquing Solution for Copper

Antiquing on all Metals

Metal Antiquing Patination Fluid - Brown - Priory Polishes

Gives a patina to iron, copper, bronze, tin, zinc, and brass. Can be used indoors or outdoors. The only acid-free antiquing fluid; therefore there is

Antiquing Fluid

Metal Antiquing Fluid, Cold Patination Fluid for Ageing Brass, Bronze or Copper

Antiquing Solutions Sophisticated Finishes

Buy Curator Antiquing Fluid Black 500ml - Maddisons UK

English Brass

Hunt & Co English Brass Scale, 1920s

Antique Brass Door Knobs Traditional brass door knobs

ENGLISH BRASS BAR PULL GLASS DOUBLE DOOR CABINET – The Prop Agency

Ashmolean Museum: British Archaeology Collections - Brass Rubbings