Incognito Element RC Enduro Trailwalker Front Bumper – ScalerFab

$ 33.50

4.5 (639) In stock

The same approach angle as not running a bumper at all, but with all the protection and scale points of a metal front bumper! ScalerFab Welded Steel Incognito Element R/C Enduro Trailwalker Front Bumper Specifications: - 200mm wide - Will not fit a bumper-mounted winch. - Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories) - Steel construction - Hand Made/Welded. - Has slots for adjustable fore/aft mounting
ScalerFab Welded Steel Incognito Element RC Enduro Trailwalker Front Bumper The same approach angle as not running a bumper at all, but with all the protection and scale points of a metal front bumper! Specifications:- 200mm wide- Will not fit a bumper-mounted winch.- Mounts using existing holes in frame - does not mount like stock plastic bumper(s) (Longer hardware recommended- hardware not included- See Optional Bumper Hardware Pack available under Accessories)- Steel construction - Hand Made/Welded.- Has slots for adjustable fore/aft mounting **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,-Flat Black: Superficial matte black coating, will scratch under normal use.-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLEMounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.*Recommend hardware mounting kits available at the top of the page as an optional add-on.** Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.