Janome Rolled Hem D2 Foot (4mm), 9mm - Red Deer Sewing Centre

The Janome 4mm Hemmer Foot for 9mm Machines is used for making rolled edges on light to medium weight fabrics. The channel guide holds the rolled fabric and allows for a straighter hem. The hemming (hemming) foot will allow us to provide a nice, aesthetic finish to dresses, skirts, blouses, shirts, bedding, tablecloths, table runners and curtains. It is designed for sewing light and medium thickness fabrics. Before hemming, fold the edge of the fabric twice to a width of 4 mm and it is good to press it to a length of approx. 3 cm. Then, when sewing, it is enough to guide the fabric evenly, because the guide on the foot will make a perfectly even fold of the fabric itself. The width of the hem after stitching is 4 mm.

Janome Fashion & Finishing Accessory Kit for 9mm Models - Red Deer

Janome 4mm Rolled Hem Foot - 9mm Machines. 202 081 007 Cat. D

Janome Products - Red Deer Sewing Centre

Hemmer Foot 4mm D2 for Janome 9mm machines

Janome Products - Red Deer Sewing Centre

Janome Edge Guide Foot, 9mm - Red Deer Sewing Centre

Janome 4mm Rolled Hem Foot - 9mm Machines. 202 081 007 Cat. D

Janome Fashion & Finishing Accessory Kit for 9mm Models - Red Deer

Blind Hem Foot 825817009 - Janome

Janome, Elna, Kenmore Wide Hemmer Presser Foot Set

Janome Hemmer Feet Set (4mm & 6mm) - Red Deer Sewing Centre

Hemmer Foot 4mm D2 for Janome 9mm machines

The Janome 4mm Hemmer Foot for 9mm Machines is used for making rolled edges on light to medium weight fabrics. The channel guide holds the rolled

Janome Rolled Hem D2 Foot (4mm), 9mm - Red Deer Sewing Centre

Sewing a Rolled Hem by Hand Historical Tailoring Masterclasses

Sew a Hand-Rolled Hem

Janome Rolled Hem Foot (6mm)

This cardboard rolled hem sewing hack that I found on @dailyart_unity is next level. Like beyond next level. The rolled hem foot is not o

HUSQVARNA® VIKING® 2 mm Shelled Rolled Hem Foot (Group 1-8) – A Sewing Sensation Calgary