Luminex GigaCore 10i

$ 28.50

4.6 (577) In stock

GigaCore 10i is a 10 Gigabit Ethernet switch in a ½ 19” package, dedicated to AV integration and installations where there are specific requirements to available space and mounting
Luminex GigaCore 10i 10Gb Network switch for converged AV networks GigaCore 10i is a 10 Gigabit Ethernet switch in a ½ 19” package, dedicated to AV integration and installations where there are specific requirements to available space and mounting It is designed to support the most advanced AV protocols out of the box and is the backbone for a converged network, allowing multiple applications to co-exist on the same network. Specifications Most suitable applications: Installations PoE: PoE ++ Optional (up to 150W) RLinkX (Link redundancy): Yes Groups (VLAN segmentation): Yes MultiLinkX (Link aggregation): Yes (With future FW upgrade) Profile manager: Yes Memory: Flash 1Gb RAM – 8Mb NOR flash 4Gb EMMC storage MAC address table: 16384 entries Address learning / Aging: Self learning, Auto aging Switching throughput: 56Gbps Jumbo frames: MTU up to 12000 IGMP support: Yes (V1/V2/V3) IGMP snooping: Yes, enabled by default Port sensing: Auto negotiation Auto crossover: MDI / MDIX Auto sensing: Full or Half Duplex (Gigabit is Full Duplex) Connectivity Ethernet connectivity: 8 x RJ45 connectors (1Gbps)) Fiber connectivity: 2 x SFP+ cages (10Gbps/1Gbps) (independent from other ports) Ethernet port speed: 1Gbps Serial: NA Power Power connectivity: 1 x IEC (C14) Power input: 100-240VAC, 50-60Hz Power consumption: Maximum 40W - Maximum 350W (Depending on configuration) Fuse: NA Backup power input: NA Backup PoE power input: NA PoE: PoE ++ Optional (up to 150W) Protocols Supported protocols: Dante©, RAVENNA/AES67©, Ethersound©, Q-SYS/Q-LAN, sACN, ArtNet, MANet2, HogNet, RTTrPL (BlackTraX), IEEE 802.1p CoS (Class of Service), DiffServ (DSCP), PoE (802.3af) (optional), PoE+ (optional), PoE++ (802.3bt) (optional), IEEE 1588 PTP V2, AVB/MILAN, IEEE 802.1as (gPTP) Sound protocol compliance: Yes (low jitter) Ethernet compliance: IEEE 802.2, IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet, IEEE 802.3af PoE(optional), IEEE 802.3at PoE+(optional), IEEE 802.3bt PoE++ 90W(optional), IEEE 802.1p CoS, IEEE 802.1d Spanning Tree, IEEE 802.1w Rapid Spanning Tree, EEE 802.1s Multiple Spanning Tree, IEEE 802.1Q VLAN, IEEE 802.1ab LLDP, IEEE 1588-2008 PtPv2,IEEE 802.1 BA-2011 AVB, IEEE 802.1as (gPTP) Configuration Display and jog: NA Configuration: Network wide configuration through Araneo software, through the built-in web server, Status LEDs: Global status LEDs: Device, power, PoE power and mode Port status LEDs: PoE, groups, link/activity and port speed Dark mode available Colored RGB LEDs: Yes Physical Mounting: Rack, 100mm x 100mm Vesa spaced mount Enclosure: Robust metal housing Dimensions (W x D x H): 220x296,4x43,2 mm 8,66x11,67x1,7 inch Weight: TBD Packaging: tbd Environment: Operating temperature: 0 to +50 °C Storage temperature: -10 to +70 °C Humidity (non condensing): 5 to 95% RH Noise level @1m: TBD BTU: Certificates/Approvals: cSGSus Mark (UL), CE Mark, UKCA Mark, CB certificate, RoHS Standards: IEC 62368-1, UL 62368-1, CAN/CSA C22.2 No. 62368-1, EN 62368-1, FCC Part 15 CFR 47, CAN/ICES-003, EN 55032, EN 55024 Product codes LU 01 00089-10G / GigaCore 10i-8x1G-2x10G(SFP+) LU 01 00089-10G-POE / GigaCore 10i-8x1G-2x10G(SFP+)-PoE++