So I bought this kinetix plenum used and had to use stock hardware

$ 24.99

4.5 (325) In stock

Axle too short?? Replaced old bottom bracket with new BBRS500. Old Shimano Tiagra cranks seem too short, a few mm threads on left crank arm still exposed, little safety clip won't close. : r/bikewrench

planning 2 mount a pull-up bar (3 anchor bolts each side) on an uneven wall. plan is a chemical resin to anchor the bolts. bottom & middle bolts i believe will be

Elastic vs jute webbing for couch repair : r/upholstery

Why does Shimano use the plastic preload cap : r/MTB

DAN A4 v4 is not compatible with 14mm fan under MB!! Riser cable has broken! : r/sffpc

Had to dremel the head off of this shear pin because it bent I suspect it wasn't a shear bolt : r/Justrolledintotheshop

I screwed on this t-nut incorrectly, and when unscrewing it somehow got waayyyy more crooked and I cannot for the life of me get it off. This is for a bidet attachment and I'm a complete novice. Are there any tips for getting this off that don't require damaging

I screwed on this t-nut incorrectly, and when unscrewing it somehow got waayyyy more crooked and I cannot for the life of me get it off. This is for a bidet attachment

GMW-B5000-1 bezel screws rattle after bezel swap : r/gshock

Any advice on how I can unscrew these seized+rusted bolts on my 2011 Toyota Avensis battery terminals? On day 3 and felt like I have tried 'everything'. : r/MechanicAdvice

Are this injectors threaded or press fitted? The fuel port doesn't allow it to turn but they won't budge when I pull so I don't know how to remove them, it's from a Chrysler Grand Voyager 2005 2.8 crd : r/MechanicAdvice